| AQUA SOFT SERIES |
| |
| Introduction |
| |
| Water softener is commonly used process equipment for removing hardness in the raw water so as to make it usable for various applications like boiler feed, cooling tower make up, textile mills, laundries, AC plants, heat exchangers & for domestic consumption. |
| |
The hardness forming salts Ca & Mg are converted to Sodium ( Na ) salts. The softening resin exchanges Ca & Mg ions from raw water & replace it with Na ion in soft water. After specified quantity of water, the resin gets saturated with Ca & Mg ions. |
|
| |
| Regeneration |
| |
| Sodium salt ( NaCl) is injected into the resin bed. The Ca & Mg ions are once again drained out & resin is re-charged with Na ion, ready to give us another service cycle. |
| |
| Rinse |
| |
The excess salt after regeneration is drained out in Rinsing & hardness is reduced after complete rinsing is done. |
| |
|
| Product Features |
| |
- Reduces hardness to prescribed levels there by improving life & efficiency of down stream equipments & units.
- Easy operation & minimum maintenance
- FRP / MS softener body as per customer requirements & size
- Manual & Automatic options available
|
| |
| Models – |
| |
| • S Series for flow up to 1500 LPH
• M Series for flow up to 12m3/hr
• L Series for flow up to 40 m3/hr |
| |
