The raw water from the storage tank ( By client ) is taken by pump to the Pressure Sand filter. Then the water passes through the PP bag filter & then to cartridge filter of 5 micron rating and is given at the suction of high pressure pump. The bag is added so that this reduces micron level upto 25 micron and also reduces cartridge filter replacement frequency. The anti-scalant chemical is dosed online to protect membrane from fouling.
The water pressure is boosted up so as to filter the ions and from one side you get pure water ( Permeate ) and from other side you get impure ( Concentrate ) water. The permeate water is stored into the product water storage tank.
The reject water is continuously drained or can be collected into separate tank and is used back for other purposes.

• Dry run protection pump - avoids unnecessary wastage of power and shuts off the pump whenever there is no water in the inlet line.
• RO Pressure indicators - ( pressure gauge) A pressure gauge continuously shows the RO feed & reject pressure.
• Auto Cut off - The tank level controller monitors the level of water in the water tank. It also accordingly controls the pump operation to maintain the level in the tank. It shuts of the inlet line when the tank is full. Low & High pressure switch also cut off the system depending on pressure settings.
• Point of use treatment - A UV purifier after the RO purifier ensures that the product water is always pure even in case of contamination due to stagnation / storage in RO water tank.
• Skid mounted & factory tested – The units are skid mounted & they are tested in our factory prior to dispatch.
  

Product Description - UNDER THE SINK RO